Need help?Do you have a question about the Ozito TSF-1211U and is the answer not in the manual?
Details the importance and correct use of safety guards for safe operation.
Provides detailed safety instructions for various sawing operations and workpiece handling.
Explains the causes of kickback and related safety precautions to prevent it.
Covers procedures for starting, stopping, setup, and maintenance during operation.
Provides further safety directives on blade usage, guards, tools, and general precautions.
Guidance on adjusting and using the parallel stop for longitudinal cuts.
How to adjust the stop rail for different cutting widths and prevent workpiece jamming.
Instructions for using the cross stop for accurate cross cuts and angle adjustments.
Steps for setting the saw blade angle using the hand wheel and adjustment screws.
Detailed procedure for making longitudinal cuts, including parallel stop setup and handling.
Guidance on using push sticks for cutting workpieces narrower than 150 mm.
Instructions for cutting very narrow workpieces (50 mm and less) using a push block.
Procedure for performing bevel cuts using the parallel stop and adjusting the blade angle.
Steps for making cross cuts using the cross stop and proper workpiece handling.
To Next Page
General
