Ozito TSF-1211 - User Manual

TABLE SAW
2000W 250mm
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 2000W (S6 25%) 1800W (S1)
Input: 230-240V ~ 50Hz
No Load Speed: 5,000/min
Blade: Ø250mm x Ø30 x 2.8mm
Bevel Angle: 0º-45° left
Blade Height Adj: 0-85mm
Max. Cutting Capacity:
Bevel 90°: 85mm
Bevel 45°: 65mm
Table Size: 640 x 490mm
With Side Ext.: 640 x 940mm
Rear Extension: 225 x 490mm
Dust Port: Ø36mm
Weight: 21kg
TSF-1211
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: blade,push stick,
spanners, bearings & carbon brushes.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1015
Base Frame Legs x 4,
Cross Struts x 4, Feet x 4
Push Stick
Sliding Mitre
Gauge
Blade Guard & Dust Extractor
Hose, Stabilizing Brackets x 2
Table Extensions x 3
Support Struts x 6
Bolts, Spring & Flat Washers,
Nuts x 32, Spanners x 2
0º 5º
10º
15º
20º
25º
22.5º
30º
45º
Rip Fence

Summary

Specifications

Warranty Information

3 Year Replacement Warranty

Details the duration and terms of the product's replacement warranty, excluding consumable parts.

Know Your Product

Setup & Preparation

1. Adjustments

Covers adjusting cutting depth and bevel angle for the table saw, ensuring the tool is off.

Setting the Rip Fence

Rip Fence Stop Height

Instructions for setting the rip fence height for thick and thin materials.

Setting the Stop Length

Guidance on adjusting the stop rail to prevent workpiece jamming during cuts.

Rip Fence Cutting Width

Information on using the rip fence for longitudinal cuts and its mounting options.

Operation

3. Setting the Mitre Gauge

Steps for fitting and adjusting the sliding mitre gauge for accurate mitre angle cuts.

4. Using the Table Saw

Covers the on/off switch operation and the importance of the blade guard.

Making a Cut

Making Longitudinal Cuts; Ripping

Procedure for making rip cuts, emphasizing safety and proper technique.

Cutting Narrow Work Pieces

Safety advice for cutting narrow pieces, recommending a push stick.

Making Bevel Cuts

Instructions for performing bevel cuts using the rip fence.

Making Cross Cuts

Steps for performing cross cuts using the sliding mitre gauge.

Adjusting the Riving Knife

Maintenance

7. Blade Replacement

Guide on how to safely fit and replace the saw blade, including preparation and safety checks.

Table Insert

Changing the Table Insert

Procedure for changing the table insert when it is worn or damaged.

Electrical Safety

General Power Tool Safety Warnings

Table Saw Safety Warnings

Ozito TSF-1211 Specifications

General

Blade Diameter	210mm
Bore Size	30 mm
No Load Speed	4500 RPM
Max. Bevel Left	45°
Max. Mitre Angle	45°