Ozito SCMS-1812 User Manual

DOUBLE BEVEL
SLIDE COMPOUND
MITRE SAW
305mm (12”)
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 2000W (S6 25%)
Input: 230-240V ~ 50Hz
No Load Speed: 4,200/min
Blade: Ø305mm x 30 x 60T
Mitre Angle: 0-49° left & right
Bevel Angle: 0-45° left & right
Max. Cutting Capacity:
Mitre 0° x Bevel 90°: 90x340mm
Mitre 45°x Bevel 90°: 90x240mm
Mitre 0°x Bevel 45°: 45x340mm
Mitre 45°x Bevel 45°: 45x240mm
SCMS-1812
WHAT’S IN THE BOX
Material Clamp
Compound Mitre Saw
Stabilising Bar
Spanner, Carbon
Brush Set
Dust Bag
ozito.com.au

Ozito SCMS-1812 Specifications

General

Brand	Ozito
Model	SCMS-1812
Category	Saw
Language	English

Summary

Specifications

Setup & Preparation

Initial Assembly Steps

Steps for unpacking and initial assembly, including stabilising bar, dust bag, and material clamp attachment.

Set-Up and Adjustments

Bench Mounting Procedure

Mitre Angle Adjustment

Steps to adjust the mitre angle using the table lock.

Bevel Angle Adjustment

Steps to adjust the bevel angle using the lock knob.

Operation

Types of Cuts Explained

Details straight, mitre, bevel, and compound mitre cuts.

Operating the Saw

Starting and Stopping Procedure

Workpiece Handling and Slide Action

Maintenance

Blade Replacement Guide

Carbon Brush and Alignment

Component Maintenance & Troubleshooting

Troubleshooting Guide

Safety Guidelines

Electrical, General, and Saw Safety

Essential electrical, general, and specific mitre saw safety rules.