To Next PageTo Next Page
Need help?Do you have a question about the Ozito SCMS-107 and is the answer not in the manual?
General| Blade Diameter | 254 mm |
|---|---|
| Voltage | 230-240 V |
| Bevel Range | 0°-45° |
| Mitre Range | 45° left and right |
| Maximum Cutting Capacity | 305 mm |
| No Load Speed | 4500 RPM |
Precautions related to the tool's electrical components and connection.
Advice on operator well-being and common sense during use.
Recommendation to use personal protective equipment.
Measures to prevent unintentional activation of the tool.
Safety step before powering on the tool.
Instructions on proper tool operation and maintenance.
Match tool voltage with power source.
Restriction on materials that can be cut.
Warning against using damaged saw blades.
Prohibition against using hands near the moving blade.
Safety rule regarding workpiece removal during operation.
Safety procedure for dealing with a jammed blade.
Ensuring the guard functions correctly.
Importance of dust control and masks.
Importance of hearing protection during operation.
Instructions for securely attaching the saw to a workbench.
Steps to set the vertical cutting angle.
Procedure for setting up the saw for trench cutting.
Procedure for setting the horizontal cutting angle.
Basic procedure for powering the saw on and off.
Performing standard cuts without using the sliding feature.
Detailed steps for setting the mitre angle.
Performing cuts using the slide mechanism.
How to position and clamp the material for cutting.
Instructions for making angled cuts.
Performing dry runs and ensuring blade speed.
