PAB Fire Compact - Page 16

www.pab.hr
PAB Fire Compact
7a
STANDARD CHIN STRAP
Adjust the lower part of the chin strap:
pull the Velcro fastener to release
the strap and tighten it until tight but
comfortable. Press together the two
Velcro straps to secure the strap. To
facilitate this step, unfasten the chin
strap and remove the helmet from the
head.
7b
TWIN CHIN STRAP
If you purchased the “twin chin strap
version” adjust the lower part of the
double strap under the chin: pull
the Velcro fastener to release the
strap and tighten it until tight but
comfortable. Press together the two
Velcro straps to secure the strap. To
facilitate this step, unfasten the chin
strap and remove the helmet from the
head.
2b
SNAP-FIT BUCKLE
Open the chin strap – if your helmet
conguration includes a snap-t
buckle, press on both sides of the
buckle to open the chin strap and then
remove the helmet from the head.
Picture 15
Picture 16