EasyManua.ls Logo

PABX 208AC - Page 12

PABX 208AC
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter Two Operating
8
2.8 Conference ( 3-party, 1 CO and 2 Extensions)
Format : Tap hook-switch + * + ABCD
ABCD = Extension number
Description: During a 2-party conversation, an extension user can add a third party to
make a 3-party conference.
Example: Extension 8002 is answering an outside call, 8002 wants to add 8015 to build
a 3-party conference.
Operating: 1) Extension 8002 is answering an outside call;
2) 8002 taps hook-switch rapidly to get internal dial tone, input * 8015;
3) 8015 is ringing, music is sent to outside caller while being transferred;
5) 8015 lifts handset can get through to outside caller and 8002, here 3-party
conference is established.
1. When two extensions are making internal call, their conversation cannot
be heard by outside caller; when in 3-party conference, outside caller and
two extensions are involved.
2. No matter when it is ready to transfer or when at 3-party conference, user
will hear internal dial tone after he tap hook-switch, here user must to input
destination extension number within 10 seconds, otherwise, this extension
will be get through to outside caller again.
Format : Tap hook-switch + ABCD
ABCD = Extension number
Description: Allows an extension user transfer an internal call to another extension.
Example: Extension 8002 is making internal talk with extension 8032, 8002 wants to
transfer call to 8015.
Operating: 1) Extension 8002 is making internal talk with 8032;
2) 8002 taps hook-switch rapidly, then dial 8015;
3) 8015 is ringing, 8032 is listening ring tone;
4) 8015 lifts handset can build internal talk with 8002, 8032 is keep
listening ring tone;
5) 8002 hangup, 8015 will get through to 8032.
2.9 Internal Call Transfer ( Between Extensions)
1. User must to tap hook-switch rapidly which time should not over assigned
hook-switch flash time(refer 3.61), otherwise, the line will be disconnected;
2. After user A has inputted extension number of C, when C is busy, three Beep
busy tone is sent to A, and A will reconnect with extension B.
3. If extension C is idle, will have follow cases:
a). C is ringing, A does not hangup, when C lifts handset can get through
to A, whoever A or C is hangup, the remain party will connect with B;
b). C is ringing, A does not hangup, when C lifts handset can get through
to A, here if B hangup, A and C will hear busy tone;
c). C is ringing, A hangup, when C lifts handset can get through to B;
d). C is ringing, B hangup, A will hear busy tone, C will stop ringing.

Table of Contents

Related product manuals