PABX 208AC - Chapter Three

Chapter Three System Program
27
3.37 Extension and CO Line Grouping Application
Description: Use these functions [3.27 ],[3.29],[3.33] and [3.35], extensions and CO
lines can be grouped flexible.
Example 1: Extension A, B, C, D and CO line 1, 2, 3 are belong to group 2; extension
E, F, G, H, J, K and CO line 4, 5, 6, 7, 8 are belong to group 3.
Therefore, extension A, B, C, D can only use CO line 1, 2, 3 to make outside
calls, and extension E, F, G, H, J, K can only use CO line 4, 5, 6, 7, 8.
But they can make intercom call and the calls can be transferred between
different groups.
( See below chart )
A
B
C
D
E
F
G
H
J
K
Group 2 Extensions Group 3 Extensions
Group 2 Outside Lines
Group 3 Outside Lines
P
A
B
X
Example 2: Extension A, B, C, D and CO line 1, 2, 3, 4, 5 are belong to group 2,
allows assign CO line 1 as exclusive used line of extension A and B,
other extensions are not allowed to use CO line 1 even it is idle;
assign extension D can only access CO line 5 to make outside call,
extension D is not allowed to use other CO lines.
A
B
C
D
Group 2 Extensions
Group 2 Outside Lines
P
A
B
X