29
Battery Gauge (State of Charge)
The BATTERY Gauge will be labeled
with either “BATTERY” or
“CHARGE LEVEL.”
Location:
Position 2 on Cluster
Purpose:
This gauge provides the propulsion
battery pack’s state of charge. When the
needle reaches the red region, the truck
enters limited performance mode
because the range is low.
Aux Loss Gauge
Location:
Position 3 on Cluster
Purpose:
This gauge shows the power consumed
by auxiliary components. Auxiliary
component power consumption is
considered any power that is not
consumed by the propulsion motor.
When the needle is within the green
region (11 o-clock to 12), the truck’s
range should not be significantly
impacted by power loss. If the gauge
value is above the green region, the
driver may need to consider turning off
or reducing power consuming units such
as the HVAC.
Virtual Gauges
All virtual gauges have been enabled
except the Virtual Tachometer. The
Virtual Tachometer does NOT indicate
the propulsion motor speed.
Trip Information Menu
Since this is a battery electric truck, the
Trip Information menu will not include
fuel economy information.
Truck Information Menu
The Truck Information Menu has been
disabled without an option to enable it.
To Next Page
Loading...
