PaceBlade LDT-101 - Cradle Definition; Full Features Docking Station

To Next Page

To Previous Page

4. Metal Mount

5. Metal Stand (only use it when the cradle is being used as a desktop station) (optional)

6. Tape is provided to hide the non-used ports (RJ-45, USB, etc)

7. NFC card

8. Keys to lock the device into the cradle (kensington lock)

9. Screws for fixating the Tablet/cradle

10. Home adapter (cradle may not work with other adapters) (optional)

11. Car charger (cradle may not work with other adapters) (optional)

12. Type C to C USB cable

13. Screwdriver for MDT-801 for SIM/SD cover

14. Full feature cradle cable (CAB-MB-FULL) (plug to the bottom side of the cradle and

lock it with the screws) (optional)

15. Full feature cradle extension cable (CAB-EX-FULL) (optional)

16. Basic feature cradle cable (CAB-MB-BASIC) (pl ug to the bottom side of the cradle and

lock it with the screws)

17. Basic feature Cradle extension cable (CAB-EX-BASIC)

18. Camera hub cable (CAB-EX-HUB), connected to the camera hub HH420 (optional)

19. Metal Clip to fixate the cradle cabling (optional)

1.2 Cradle Definition

1.2.1 Full Features Docking Station

③

⑤

Pin 18

RJ45 Connector

④

Ignition Switch

②

USB 2.0 OTG Connector

①

Type-C USB 2.0 (only for charging)

Pin1

Pogo Pin