Attach the Left Rear Wheel
7
spanner
hubcap wheel
locknut
wheel
cover
axle
small
washer
large
washer
Note: Both rear wheels are
identical and can be placed
on either axle.
1. Remove the locknut and the small washer
from the axle. Leave the large washer on the
axle.
2. Press the hubcap onto the wheel.
3. Place the wheel on the left side of the axle.
4. Place the small washer onto the axle.
5. Place the locknut onto the axle and rmly
tighten with the spanner.
6. Line up the wheel cover tabs with the hubcap
slots. Press the wheel cover onto the hubcap.
To Next Page
