Pacific Digital DrumXtreme

To Next Page

To Previous Page

2. Please check to ensure that your computer supports the

minimum system requirements of the program.

3. If you are using Windows®2000 or Windows®XP, you may

need to enable or disable the “digital CD playback” mode of

your CD-ROM.

 If your CD-ROM supports “Digital CD

Playback”, enable the function.

 If your CD-ROM does not support “Digital

CD Playback”, then disable the function.

 If you do not know if your CD-ROM supports

“Digital CD Playback”, ask the manufacturer

of your PC.

To enable or disable “Digital CD Playback” follow step a-d

below:

a. Right-click your mouse on the “My

Computer” icon on your Windows® desktop

and select “Properties” (alternatively you can

select “System” in Control Panel and double-

click the left mouse button to open it).

b. Select the “Hardware” tab, and click “Device

Manager”

c. After opening “Device Manager”, click “+”

to open the tree structure under the picture of

CD-ROM drive, and right-click your mouse

on the icon of the CD-ROM drive, then select

“Properties”. (If there are more than two CD-

ROM drives, please select the one you will use

for playing the DrumXtreme Music CD).

d. Select the “Properties” tab and you will see

“Enable Digital Playback for this CD-ROM

Device” near the middle of this tab. Click the

square in front of the item “Enable Digital

Playback for this CD-ROM Device” to

enable/disable this function (a check-mark

enables, an empty check box without a check-

mark disables).

Pacific Digital DrumXtreme - Page 47