Pacvac Superpro 700 Series User Manual (English)

Questions and Answers:

M
Mrs. Lisa NewmanJul 29, 2025
Why does my Pacvac Superpro 700 backpack have no or poor suction?
- A
  Anita CollierJul 30, 2025
  If your Pacvac Vacuum Cleaner backpack has no or poor suction, consider the following possible causes: * The Hypercone dust bag may be full. If so, remove, empty, and clean the Hypercone dust bag. * The Hypercone dust bag may not be installed correctly. Remove and empty the dust bag, ensuring the rubber edging is correctly fitted around the canister. * The hose may not be installed correctly. Reconnect the hose and ensure it is correctly sealed. * There may be blockages. Remove the hose, wand, and floor tools, and then remove any blockages. * The filters may be blocked. Clean the Hypercone HEPA filter and the external motor filter.
T
Timothy BlairAug 7, 2025
What to do if Pacvac Vacuum Cleaner backpack has no suction or poor suction?
- D
  don17Aug 7, 2025
  If your Pacvac Vacuum Cleaner backpack has no or poor suction, several factors could be the cause. Start by checking if the Hypercone dust bag is full; if so, remove, empty, and clean it. Ensure the Hypercone dust bag is installed correctly, making sure the rubber edging is correctly fitted around the canister. Also, verify that the hose is correctly installed and sealed. Check for any blockages in the hose, wand, and floor tools, and remove them. Finally, clean the Hypercone HEPA filter and external motor filter.
M
Mark KingAug 18, 2025
What to do if my Pacvac Vacuum Cleaner backpack is not working?
- J
  jamesjamesAug 18, 2025
  If your Pacvac Vacuum Cleaner backpack isn't working, there are several things you can check: * First, ensure the power cord is firmly plugged into the power point, short lead, and the machine itself. * If the backpack shuts off, it may be due to high motor temperature. Turn the main switch off, unplug the backpack, and allow it to cool down for 30 minutes (60 minutes for Wispa models). Then, conduct safety and maintenance checks. * Also, check if the circuit breaker or RCD has tripped. If it has, make sure the machine is in good working order, and then reset the breaker or RCD. If it trips again, there may be a more serious issue.

Pacvac Superpro 700 Series Specifications

General

Voltage	220-240V
Frequency	50Hz
Airflow	45L/s
Warranty	2 years on body and motor
Cord Length	18m
Model	Superpro 700
Category	Vacuum Cleaner
Filter Type	HEPA
Filtration	HEPA
Type	Backpack
Dust Capacity	30L
Motor Type	Flow-through