Configure and View Status
20 Megabit Modem CRA-C User Manual
ENTER
ENTER
is the factory-default password. If you
establish a different password, you must type the new
password at the LOGON PASSWORD prompt on a
subsequent log on.
2 Type your password at the password prompt or press
ENTER
ENTER
(factory default password) if you have not customized
your password. The Main Menu displays.
07/02/97 PAIRGAIN TECHNOLOGIES 08:43:18
ATU-C ADSL MEGABIT MODEM TERMINAL 01.01
MAIN MENU
1. SYSTEM STATUS AND CONFIGURATION
2. ADSL MENU
3. BRIDGE/ROUTER MENU
4. REMOTE LOGON
Q. LOGOUT
ENTER CHOICE-->
See the section, "Configure System Settings," to establish a new
password.
To Next Page
Loading...