PairGain CRA-C - Reset ADSL Transceiver

Configure and View Status
Megabit Modem CRA-C User Manual 29
Reset the ADSL Transceiver
When you change any of the options 1 through 4 at the ADSL Menu, Reset
the ADSL transceiver to make the changes effective and re-establish the
ADSL link.
07/02/97 PAIRGAIN TECHNOLOGIES 08:44:57
ATU-C ADSL MEGABIT MODEM TERMINAL 01.01
ADSL MENU
1. ADSL PERFORMANCE STATUS
2. 24 HOUR ADSL PERFORMANCE HISTORY
3. 7 DAY ADSL PERFORMANCE HISTORY
4. ADSL ALARM HISTORY
5. ADSL TRANSCEIVER CONFIGURATION MENU
6. FULL ADSL RESET
7. SESSION ADSL RESET
(M)ain
ENTER CHOICE-->
Type either
6
6
or
7
7
from the ADSL Menu to Reset the ADSL transceiver.
Table 9 describes the Reset options.
Table 9. Reset ADSL Transceiver Options
T
yp
e
No.
For Option Function
6 Full ADSL
Reset
Select this option to reset and set a transmission rate
up to the maximum specified in options 2 and 3 of
the ADSL Transceiver Configuration Menu. It
determines this rate by assessing the signal quality
data (line length and noise conditions, for example)
and the SNR value set in option 4 of the ADSL
Transceiver Configuration Menu.
7 Session ADSL
Reset
Select this option to reset and use the data rates
acquired during the previous full startup rather than
re-assessing the signal quality data and determining
new rates.