PAJ POWER - Step 3: Insert SIM Card

POWER Finder v.1.2ENG
© PAJ UG (haftungsbeschränkt)
7
Step 3: Insert your SIM Card in the
POWER finder
Insert the completely activated SIM Card
without PIN-Code in the POWER finder.
Open the rubber gasket on the outside and
slide the SIM Card in the SIM Card holder.
Please make sure that the bevelled edge of
your SIM Card (as shown) is located at the
bottom left and that the gold contacts face
downwardly.
In order to insert the SIM Card deeply
enough, please use a sharp object. Please