1
Unpacking Information
Thank you for purchasing this product. Before installation,
please verify that your package contains the following
items.
1. One 16/24-port gigabit switch with 2 SFP ports
2. One AC power cord
3. Rack-mount brackets and screws (included, optional
use)
4. User’s Manual
Introduction
These SE Series Unmanaged switches offer
high-performance Gigabit Ethernet switching with 16/24
Gigabit Ethernet ports and 2 Gigabit SFP ports. Providing
you a cost-effective, space-saving solution for expanding
your network. The fully Gigabit Ethernet ports of these
switches offer high bandwidth connection for today’s most
demanding applications. The two SFP ports provide the
ability to add fiber-optic connectivity between other
network switches, giving the option for long-distance
communications.
Automatic MDI/MDI-X crossover detection ensures you
will not need to worry about the cable type by
automatically switching the port’s receive and transmit
connections with plugged in devices. Also, flow control
ensures the correctness of data transmitting. What’s more,
the 802.3x and backpressure flow control mechanisms
work respectively for full and half duplex modes.
The switch is plug and play without any software to
configure and also fully compliant with all kinds of
network protocols. Moreover, the rich diagnostic LEDs on
the front panel demonstrate the operating status of
individual port and the whole system.
To Next Page
Loading...
Need help?
General
