Pakedge Device & Software SE-18 User Manual

7
Product Specifications
Standard
IEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3x full-duplex flow control
IEEE802.1p class of service, priority
protocols
IEEE802.3az (Energy Efficient Ethernet)
Interface
16/24 10/100/1000Mbps RJ-45 ports
2* SFP ports
Cable
Connections
RJ-45 (10BASE-T): Category 3,4,5
UTP/STP
RJ-45 (100BASE-TX): Category 5 UTP/STP
RJ-45 (1000BASE-T): Category 5,5e, 6 or
enhanced UTP/STP
Fiber: depend on SFP types
Network
Data Rate
10/100/1000 Mbps Auto-negotiation
Transmission
Mode
10/100Mbps: Full-duplex, Half-duplex
1000Mbps: Full-duplex
LED
Indications
1*power LED(Power: Blue)
1*loop LED(Loop：Blinking Red)
18/26*port LEDs(Link/Act: Blue)
Memory
8K MAC entries
4.1Mbit buffer memory
Jumbo Frame
9K bytes
Temperature
Operating: 0~40℃(32°~104°F)
Storage: -20 ~ 70℃(14°~158°F)
Humidity
Operating: 10%~90%, non-condensing
Storage: 5% ~ 95%, non-condensing
Power Supply
Internal power supply 5V/5A
EMC
FCC/CE Class A
Safety
EN60950-1

Pakedge Device & Software SE-18 Specifications

General

Brand	Pakedge Device & Software
Model	SE-18
Category	Switch
Language	English