Pakedge Device & Software SE-8P4 User Manual

5
Product Specifications
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3x full-duplex flow control
IEEE802.3ab 1000BASE-T
IEEE 802.3af/at PoE standard (DTE power via MDI)
Interface
8*10/100/1000 Mbps auto MDI/MDI-X RJ-45 switching ports
Supports 63W Max;
Full load:
31.5W(at) x 2 Ports
15.4W(af) x 4 Ports
Cable Connections
RJ-45 (10BASE-T): Category 3,4,5 UTP/STP
RJ-45 (100BASE-TX): Category 5 UTP/STP
RJ-45 (1000BASE-T): Category 5,5e or enhanced UTP/STP
Transmission Mode
10/100Mbps Full-duplex, Half-duplex
1000Mbps Full-duplex
LED indications
1 * power LED
8 * Link/ACT LEDS
4 * PoE LEDS
1 * loop LED
Memory
8K MAC entries
9216 bytes jumbo packet length
128K bytes Buffer Memory
Emission
FCC & CE
Safety
LVD
Operating
Temperature
0
0
~ 40
0
C (32
0
~ 104
0
F)
Operating Humidity
10% - 90%(non-condensing)
Power Supply
Internal power supply
100-240V/47-63 Hz universal input
Dimensions & Weig
12.68” x 7.31” x 1.75”
4.3 lbs.

Pakedge Device & Software SE-8P4 Specifications

General

Brand	Pakedge Device & Software
Model	SE-8P4
Category	Switch
Language	English