Pakedge Device & Software WK-2 - Appendix A - Specifications; Hardware and RF Specifications

WK-2x User Guide Version v1.2
Appendix A – Specs
HARDWARE SPECIFICATIONS
 1 x 10/100/1000 Gigabit Ethernet RJ-45 port with IEEE 802.3at Power over Ethernet (PoE+)
support
 1 x 10/100/1000 Gigabit Ethernet RJ-45 port
 Configurable LED Indicators for Power, Ethernet, 2.4GHz Wireless and 5GHz Wireless
 Power over Ethernet (PoE+) IEEE802.3at compliant
 Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz (depends on different countries)
 DC input: 12V/2A
RF INFORMATION
 Frequency Band:
o FCC (US)
2.412~2.462Ghz
5.18~5.24Ghz, 5.745~5.825Ghz
o IC (Canada)
2.412~2.462Ghz
5.18~5.24Ghz, 5.745~5.825Ghz
o CE (Europe)
2.412~2.472Ghz
5.18~5.24Ghz, 5.26~5.32Ghz, 5.5~5.7Ghz
NOTE: The CE DFS channels(5.26~5.32Ghz, 5.5~5.7Ghz) are for Europe countries only,
please upgrade to Firmware v1.13 or above to enable the CE DFS channels.
 Transmit Power (Typical):