Pakedge Device & Software WK-2 - Management and Security; Environment

WK-2x User Guide Version v1.2
o 2.4/5 GHz have independent operation modes
o Access Point/ WDS Bridge/WDS AP/Repeater
 Up to 18 SSIDs
 Supports 802.1q VLANs
 Spanning Tree Supports 802.1d Spanning Tree Protocol
 IP Auto-configuration – DHCP client
 Transmission rate options:
O 2.4 GHZ – B-ONLY, G-ONLY, B/G-MIXED, G/N-MIXED, B/G/N-MIXED
O 5 GHZ – A-ONLY, A/N MIXED, A/N/AC-MIXED
MANAGEMENT AND SECURITY
 User can adjust power by dBm
 Web-based configuration (HTTP)
 Upgrade firmware via web browser/internet
 Auto-channel selects the least congested channel
 Backup and restoration settings available through web interface
 QoS WMM
 WPA-PSK/WPA2-PSK/ WPA/WPA2 Mixed using TKIP or AES
 SSID broadcast can be enabled or disabled
 WLAN L2 Isolation (AP mode only)
 List of connected wireless clients available
ENVIRONMENT
 Temperature Range: 0 to 45° C (32° to 113° F)
 Storage: -20 to 60° C (-4° to 140° F)
 Humidity (non-condensing):