24/7 PHONE SUPPORT 252-316-0108
Please note: Camera works best on normal 2.4
GHz WIFI and does not support 5GHz WIFI. Most
routers broadcast both 2.4GHz and 5GHz networks
simultaneously. No need to disable your 5GHz
network to use the camera.
TO RESET THE CAMERA for any reason during setup:
Use included pin to place into RESET hole (see photo
below).
Be sure to hold the reset button for at least 10
seconds until you hear reset sound “CHICHING”.
(Please note: if after 1 minute you do not hear the
camera beeping repeat the above instructions by
holding the reset pin for another 10 seconds until you
hear the reset sound,“CHICHING”. The camera is not
reset unless you hear the reset sound,”CHICHING”.
To Next Page
Loading...