Need help?Do you have a question about the Palermo Smart Camera and is the answer not in the manual?
Instructions for resetting the camera using the provided pin.
Instructions to download the app from the App Store or Play Store.
Details on registering and logging into the app using email for US users.
Instructions on selecting the correct region and initiating device addition.
Steps to add a new device through the app interface.
Overview of Smartlink, Wired, and AP connection modes.
Entering WIFI password and initiating the Smartlink connection.
How to view live video and use the microphone function.
Instructions for connecting the camera via an Ethernet cable.
Steps to discover, name, and configure the device using Ethernet.
Guide to switch the camera's connection from Ethernet to Wi-Fi.
How to share the camera feed with other users via the Yoosee app.
Managing shared friends and devices within the Yoosee app.
Steps to add devices manually using mobile data.
Steps to add devices manually when connected to the same Wi-Fi.
How to control camera movement, zoom, audio, and capture photos.
Instructions to activate and configure motion detection alarms.
Instructions to navigate to the Yoosee website for setup.
Step-by-step guide for installing the CMS client software.
Logging in, setting parameters, and adding cameras in the CMS client.
Instructions for setting up wireless sensors for defense area alerts.
Detailed steps for coding sensors and arming alarms.
Setting up email notifications for alarms and updating device firmware.
Solutions for camera connection errors and device discovery problems.
Troubleshooting steps for offline devices and incorrect password messages.
Resolving problems related to playback, recording, and TF card functionality.
Addressing Wi-Fi connection failures and password recovery.
List of items included in the camera package.
To Next Page
General