188
Lubricants and Operating Media
Recommended Hydraulic Oil Grades
• Shell Tellus S2 V 15
Operation temperature: -20 °C to 60 °C
• Aero Shell Fluid 41
Operation temperature: -54 °C to 90 °C
"Cold climate" option
• Aero Shell Fluid 41 and low temperature gaskets against vit-
rification of sealing material
Operation temperature: up to -54 °C
Environment-friendly Oils
Increasing awareness for the environment calls for environ-
ment-friendly, biodegradable oils for hydraulic equipment. On
request we can supply you with an oil grade tested by us. The
operation temperature of this oil is listed as -20 °C to 60 °C.
Please contact us.
When using other oil types, this may result in damage to cylin-
der seals or annoying noise.
Recommended Lubricating Grease/Oil
For low-maintenance brass bearings and guide rails:
• Shell Gadus S2 (heavy duty grease)
• Comparable lubricating grease
For plastic bearings:
• Interflon LUBE EP+
• Comparable lubricating oil
Betriebsanleitung_Hubladebuehnen_EN.book Seite 188 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...