Palfinger MBB C 1000 L - Page 32

32
Putting Up A-Shaped Safety Railings
 Pull the respective safety railing towards the center of the
platform (1).
 Rotate the respective safety railings by 90° upwards (2) and
lower it until it firmly locks into place.
Laying Down A-Shaped Safety Railings
 Pull up the respective safety railing (1).
 Then rotate the respective safety railing inwards (2), until
the magnetic resilient pad touches down onto the platform.
1
1
2
2
1
1
2
2
Betriebsanleitung_Hubladebuehnen_EN.book Seite 32 Donnerstag, 15. August 2019 4:04 16