32
Putting Up A-Shaped Safety Railings
Pull the respective safety railing towards the center of the
platform (1).
Rotate the respective safety railings by 90° upwards (2) and
lower it until it firmly locks into place.
Laying Down A-Shaped Safety Railings
Pull up the respective safety railing (1).
Then rotate the respective safety railing inwards (2), until
the magnetic resilient pad touches down onto the platform.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 32 Donnerstag, 15. August 2019 4:04 16