Need help?Do you have a question about the palintest Pooltest 3 and is the answer not in the manual?
General| Type | Photometer |
|---|---|
| Display | LCD |
| Technology | Colorimetric |
| Power Supply | Battery |
| Resolution (Free Chlorine) | 0.01 mg/L |
| Resolution (Total Chlorine) | 0.01 mg/L |
| Test Parameters | pH, Chlorine |
| Measurement Range (Free Chlorine) | 0 - 5 mg/L |
| Measurement Range (Total Chlorine) | 0 - 5 mg/L |
| Usage | Pool and spa water testing |
| Battery Life | Approx. 1000 tests |
| Resolution (pH) | 0.1 pH |
Identifies the main components and buttons of the Pooltest instrument.
External light entry or internal contamination affecting optical path.
Indicates a fault in an optical component requiring service.
Insufficient light during blanking, check tube and optics.
Sets of Check Standards verify instrument calibration and performance.
Guidance on ensuring accurate measurements during pool testing procedures.
Procedure for diluting samples when results exceed the test range.
To Next Page
