Need help?Do you have a question about the palintest Pooltest 6 and is the answer not in the manual?
General| Measurement Parameters | Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Cyanuric Acid, Hardness |
|---|---|
| Measurement Range (Cyanuric Acid) | 0 - 100 mg/L |
| Measurement Range (Hardness) | 0 - 500 mg/L |
| Test Method | Colorimetric |
| Display | LCD |
| Measurement Range (Free Chlorine) | 0-5 mg/L |
| Measurement Range (Total Chlorine) | 0-5 mg/L |
| Measurement Range (pH) | 6.8-8.4 |
Details the layout and functions of the Pooltest instrument's buttons and screen.
Details common error codes (E7, E8, E9) and their causes/solutions for instrument operation.
Steps and tips for ensuring accurate sample preparation and measurement for reliable test results.
Step-by-step guide for measuring Free and Total Chlorine levels using DPD tablets.
Procedure for measuring pool pH using Phenol Red tablets.
Instructions for testing Cyanuric Acid levels.
Method for determining Total Alkalinity using Alkaphot tablets.
Steps for measuring Calcium Hardness using Calcicol tablets.
Procedure for testing Bromine concentration.
Guide to calculating the Palintest Water Balance Index and interpreting results with recommendations.
To Next Page
