Need help?Do you have a question about the palintest Pooltest 4 and is the answer not in the manual?
External light entering test cell or contamination affecting internal light path.
Indicates a fault in an optical component, requiring service or recalibration.
Insufficient light received during blanking, check tube and clean optics.
External light entering test cell or contamination affecting internal light path.
Indicates a fault in an optical component, requiring service or recalibration.
Insufficient light received during blanking, check tube and clean optics.
General| Test Parameters | pH, Free Chlorine, Total Chlorine, Bromine |
|---|---|
| Measurement Parameters | pH, Free Chlorine, Total Chlorine, Bromine |
| Parameters | pH, Free Chlorine, Total Chlorine, Bromine |
| Range (Bromine) | 0 - 10 mg/L |
| Resolution (Free Chlorine) | 0.1 mg/L |
| Resolution (Total Chlorine) | 0.1 mg/L |
| Resolution (pH) | 0.1 |
| Display | LCD |
| Range (Free Chlorine) | 0 – 5.0 mg/l Cl2 |
| Range (Total Chlorine) | 0 – 5.0 mg/l Cl2 |
| Number of Tests | 100 |
| Included Components | instruction manual |
| Technology | Colorimetric |
| Power Supply | Battery |
To Next Page