Pall LevMixer DB-300 User Manual

Document #: 020-17475-00 Revision: E Page #: 50 of 63
P.9 Finishing Mixing Run
Each time upon finishing run the notification to operator is exposed on screen. Details of
the notification depend on events during process. Possible scenarios are provided in
the Table 5.
Table5. Finish notification details
PROCESS CONDITION
FINISH NOTICE CONTENT
STARTED
DURING RUN
FINISH STATUS
DURATION SHOWN
Manual
permanent or
timed run.
Normal process
Successful
Neat mixing time
(pause time is not
included)
Paused-resumed
Failure-Alarm
Unscheduled
Stopped
(timed run only)
Recipe Run
Normal process
Successful
Actual duration of
recipe run time
(includes pauses)
Pause-resumed
Failure-Alarm
Unscheduled
Aborted
P.10 Initial Settings
Default settings are the factory preinstalled parameters as listed in the Table6. The
parameters can be adjusted through the corresponding editor screens.
Table6. Initial settings of user interface parameters
Description of parameter
Units
Factory setting
Manual mode speed of rotation
RPM
20
Manual mode run duration
Min
0
Recipe mixing phase time duration (in all instructions)
Min
0
Recipe pause phase time duration (in all instructions)
Min
0
Recipe speed of rotation (for all instructions in
recipes)
RPM
20
Auto logout time
Min
10
Operator Password
123456
Supervisor Password
123456
Date format
MM:DD:YY
Calendar date
Clock time

Pall LevMixer DB-300 Specifications

General

Brand	Pall
Model	LevMixer DB-300
Category	Mixer
Language	English