Pall LevMixer DB-300 User Manual

Document #: 020-17475-00 Revision: E Page #: 19 of 63
J. BAG-INTERFACE ASSEMBLY
Figure 17: Assembly of dry bag with interface
Procedure:
1. Carefully open the EXTERNAL packaging of the mixing bag. A protective shield is
magnetically attached to the outside of the bag over the Impeller seat. This shield
must be removed from the bag before assembling the interface.
2. Assemble the centering aligner and magnetic clamp on the outside of the bag as
shown in Figure 17.

Pall LevMixer DB-300 Specifications

General

Brand	Pall
Model	LevMixer DB-300
Category	Mixer
Language	English