USING EMAIL AND OTHER WIRELESS SERVICES
CONNECTING TO DEVICES WITH BLUETOOTH
®
WIRELESS TECHNOLOGY
111
5
CHAPTER
When the transmission is complete,
“Done” appears next to the name of the
receiving device.
Receiving information over a Bluetooth
connection
1 Go to your Today screen, and then tap
Bluetooth .
2 Check the Turn on Bluetooth box to
turn on your smartphone’s Bluetooth
feature.
3 Press OK .
4 If you have already set up a partnership
with the transmitting device, your
smartphone is ready to receive the info.
If you haven’t set up a connection,
check the Make this device
discoverable to other devices box to
let the device find your smartphone and
request a connection.
5 When your smartphone is receiving
info, a notification tells you that a
transmission is in progress. To stop the
transmission, press Cancel (left
action key); to close the notification,
press Dismiss (right action key).
Synchronizing over a Bluetooth
connection
BEFORE YOU BEGIN Make sure your
computer is equipped with Bluetooth
wireless technology and that you installed
the synchronization software on the CD
that came with your smartphone.
TIP
Check your battery level before
establishing a Bluetooth connection. If the
battery level is low, you can’t make a
Bluetooth connection.
TIP
If you have trouble receiving info over a
Bluetooth connection, press Start and select
Settings. Select the Connections tab, and
then select Beam. Make sure the Receive all
incoming beams box is checked.
DID
YOU
KNOW
?
The Bluetooth icon on your
Today screen indicates the status of your
smartphone’s Bluetooth feature:
Gray = Bluetooth off.
Blue = Bluetooth on.
White = Connected to a Bluetooth device.
Headset = Call in progress with a Bluetooth
headset or car kit.
To Next Page
Loading...
