SETTING UP YOUR SMARTPHONE AND COMPUTER
MAKING YOUR FIRST CALL
12
1
CHAPTER
to look at your calendar. You can also turn
off your smartphone’s screen without
turning off your smartphone’s wireless
features.
1 Press Power/End to wake up the
screen, and then press Center to
turn off Keyguard.
2 Briefly press Power/End to turn off
the screen.
Making your first call
The battery comes with a sufficient charge
to complete the setup process and activate
your Palm Treo 700wx smartphone. After
activation, we recommend charging your
smartphone for 3.5 hours (or until the
indicator light is solid green) to give it a full
charge.
1 Turn on your phone (see Turning your
phone on and off).
2 If you do not see your Today screen,
press Phone/Send .
3 If No Service appears in the upper left
or if you are unable to complete a call,
you may need to activate your phone.
Contact your wireless provider for
assistance.
4 If the name of your wireless provider
appears in the upper left, use the
number pad on the keyboard to enter
the number you want to call.
TIP
You can set how long the screen stays on
during a period of inactivity. Press Start,
select Settings, select the System tab, and
then select Power. Select the Advanced tab,
and then adjust the On battery power
setting.
To Next Page
Loading...
