USING YOUR PHONE
MORE WAYS TO MANAGE CALLS
56
3
CHAPTER
Making a conference call
When the second call is outgoing, you can
join two calls in a conference session.
Additional charges may apply and minutes
in your account may be deducted for each
active call. Please contact your wireless
provider for more information.
1 Put the first call on hold, and then place
a second call.
2 Press Conference (left action
key); this joins the two active calls in a
conference.
3 When you’ve finished, press End
Conference (left action key); this
ends the second call and returns you to
the first call. If you’re ready to hang up
both calls, press Power/End
instead.
Using Flash mode during an active call
Flash mode is an alternate way to manually
manage your calls while one or more calls
are active. The preferred methods are
described in Making a second call
,
Answering a second call (call waiting)
, and
M
aking a conference call. Flash mode is
often used during a conference call when
DID
YOU
KNOW
?
When the second call is
outgoing, you can conference the two calls,
but you cannot swap between them.
When the second call is incoming, you can
swap between the two calls, but you cannot
conference them.
When two calls are active and you press
Power/End, you hang up both calls. To return
to the first call, wait for the person on the
second call to hang up.
To Next Page
Loading...
