Paloform caldera CIF-E-18 User Manual

INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference
Burner conforms to: ANSI Z21.97/CSA 2.41 - (2012/10/01) “Outdoor Decorative Gas Appliances”
We recommend that our re pits be
installed and serviced by professionals
that are certied in the U.S. by NFI
(National Fireplace Institute)
OUTDOOR FIREPIT BURNER MODELS CIF-E-18 & 18P
DANGER - IF YOU SMELL GAS
1. Shut o gas to the appliance.
2. Extinguish any open ame.
3. If odor continues, keep away from the appliance and immediately call your gas
supplier or re department.
WARNING
Do not store or use gasoline or other ammable vapors and liquids in the vicinity
of this or any other appliance. An LP-cyllinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space such as a camper, tent,
car or home.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
injury or property damage. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
WARNING: FOR OUTDOOR USE ONLY!
DANGER
CALDERA FIRE PIT Electronic Ignition Installation Manual

Paloform caldera CIF-E-18 Specifications

General

Brand	Paloform
Model	caldera CIF-E-18
Category	Outdoor Fireplace
Language	English

Summary

Essential Safety Precautions

Gas Leak and Flammable Vapors

Immediate actions for gas leaks and warnings against flammable liquids/vapors.

Carbon Monoxide and Operation Safety

Risks of CO poisoning and warnings on proper installation and outdoor use.

SAFETY INFORMATION

Appliance Inspection and Maintenance

Installation Requirements

POSITIONING GAS SUPPLY

Gas Line Requirements

PLACEMENT AND ASSEMBLY

Handling and Placement Precautions

Assembly and Connection Steps

CLEARANCE TO COMBUSTIBLES

Caldera Unit Clearances

Bol Unit Clearances

BURNER ASSEMBLY

Assembly and Media Installation

Steps for connecting the burner, leak testing, adding media, and placing toppings.

CONNECTING TO GAS SUPPLY

Required Installation Items

Installation Requirements & Leak Testing

Steps for installation, sediment trap, and leak testing procedures.

LIGHTING YOUR FIRE PIT

Initial Lighting Instructions

Procedure for purging air, testing for leaks, and initial burner lighting.

Safety Warnings for Lighting

Critical warnings regarding manual lighting, valve servicing, and leak checks.

OPERATING AND SHUTDOWN

Operating Instructions

Steps for operating the appliance, including power connection and ignition.

Turning Off Gas Supply

CLEANING AND MAINTENANCE

Burner Element and Pilot Cleaning

TROUBLESHOOTING

Common Observed Problems

List of common issues like intermittent shutoff, smoking, noise, and gas odors.

Smell Gas Procedure

Critical steps to follow if a gas odor is detected.

TROUBLESHOOTING CONT'D

Ignition and Flame Issues

Solutions for no power, pilot ignition failure, delayed ignition, and flame height.

Power and Connection Troubleshooting

PARTS LIST AND IDENTIFICATION

Keyed Parts List