Pamex FKL - Page 3

CONTENTS
INSTALLATION INSTRUCTIONS
1. COMPONENTS
3. LATCH INSTALLATION
4. STRIKE PLATE INSTALLATION
5. LEVER DIRECTION DETERMINATION
7-1. MOUNTING EXTERIOR ASSEMBLY
7-2. PREPARING TO MOUNT INTERIOR ASSEMBLY
7-3. REMOVING DECORATIVE COVER
7-4. MOUNTING INTERIOR ASSEMBLY
7-5. BATTERY INSTALLATION
7-6. REINSTALL LEVER
8-1. EXCHANGE OF LEVER
8-2. EXCHANGE OF LEVER (REMOVAL OF INSIDE LEVER)
8-3. EXCHANGE OF LEVER (REMOVAL OF OUTSIDE LEVER)
2. DOOR PREPARATION
6
2
TEMPLATE
5
6-1. TO RESET DIRECTION OF INSIDE LEVER
6-2. TO RESET DIRECTION OF OUTSIDE LEVER
8-4. SWAP INSIDE AND OUTSIDE LEVERS (REMOVAL OF CYLINDER)
8-5. SWAP INSIDE AND OUTSIDE LEVERS (ASSEMBLE OUTSIDE LEVER)
8-6. SWAP INSIDE AND OUTSIDE LEVERS (ASSEMBLE INSIDE LEVER)