Pamex FKL - Page 38

TROUBLESHOOTING GUIDELINE
36
F. Yellow indicator is on or keeps
flashing
E. Can not open the door aer input
a correct
1. Make sure you have entered the correct user code.
2. Check to see if the indicator is flashing. If the indicator is
flashing, please replace the baeries with new ones.
3. Please make sure the strike plate is installed correctly if you
see the latch is jammed.
1. It means these baeries are geng low, please replace all
the baeries.
2. Use alkaline baeries only.
SoluonsProblem
G. What happens if the lever lock
cannot be auto- locked aer
closing door
1. Make sure the arrow of the thumbturn is directed to LOCK.
2. Make sure the key is withdrawn from the lock.
H. Yellow indicator keeps flashing or
the lock keeps beeping aer
unlocking.
1. It means these baeries are geng low, please replace all
the baeries.
2. Use alkaline baeries only.
I. Red indicator keeps flashing and
beeping when I try to program the
lockset
1. Make sure you have entered the correct programming
code.
2. Make sure the lever is leveled (horizontal) completely.