The device is already programmed in an optimal way when you get it, so that you
hardly need to do operations described here. We recommend you to do extensive
changes of the device with the help of your specialist supplier if you do not feel
confident. You get detailed information about chosen settings in all menus.
After you plugged the device in the way it was described above, please choose the
corresponding HDMI-input on TV, that you have chosen. At first turn the receiver with
the main power switch on the rear panel on, and then with the remote control. The
device should start with program number 1. If everything is connected in a right way
and the receiver meets all the parameter, then you should see the set program now.
You do not really need to make any other settings, if factory settings are ok for you.
Please check the cabling between the device and the outlet.
General options
MENU > Main menu >Edit Settings > General Options
In the following menus you can define the basic settings for your device. The factory
settings are set for England. But you can change them here according to your
wishes.
Time settings: Press „OK“ key to open the sub menu „Time and
settings”.
OSD language: You can select the language you want to apply in
menus.
Preferred audio language: Some channels offer programs in different
languages. You can select here your primary desired
language of the audio. You can also choose the
language for a current program by pressing the blue
button on the remote control.
To Next Page
Loading...
General