INSTALLING YOUR MACHINE
44
Using Email to Retrieve the Journal
To retrieve the existing Journal data, send an email to the DP-2500/3000’s email address with the following
command in the "Subject:" line:
#get jnl(password)#: Where the "password" is, the Remote Password programmed in the DP-2500/3000’s
User Parameters (i.e. 123456789).
The Journal will be send back to the originating station’s email address.
After receiving the journal, use a fixed width font (i.e. Courier), in order to align the received journal’s contents
on the PC.
A separate email message is sent by the DP-2500/3000, an "Internet Fax Return Receipt" to the Manager’s
email address programmed in the User Parameters, informing of the Journal transfer.
(see Note 1)
NOTE
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid". (See page 57)
Programming or Retrieving Parameters via Email
To Next Page
Loading...
