Panasonic AG-1980P - Storing TV Channels on VCR

Storing
TV
Channels on your
VCR
1*3
2
PRESET/FINE/
NORMAL
2
ANT
SELECT
Introduction
The VCR
is
fitted with its own tuner (just like a normal TV
set) and can be
preset
to receive up to 181 TV broadcast
stations.
Preparations
•Turn
the
TV
on.
•Select
Channel
3
or
4 on the TV for video
playback.
•
Set
the VCR/TV to
“VCR".
TV
mode
3
PRESET/FINE/
NORMAL
Direct Tuning
Your VCR is
preset
at
factory.
This means that all
channels
can
be
received at
the
program
positions
shown in the chart
on the next page.
This is achieved
by
selecting the
desired
Tuning mode.
•
Blanking unwanted
channels
so
that they will be skipped
during the channel
selection
will allow
you
to
find your
desired
channel quickly. Refer to the next page
how
to
blank
program positions.
Selecting the Tuning
Mode
This VCR can select
from among 4
tuning
modes:
TV,
CATV, CATV H, CATV I.
1 Press
PRESET/FINE/NORMAL.
2
The tuning
mode can be
changed by
pressing
ANT
SELECT.
3
Press
PRESET/FINE/NORMAL
twice
to select
the VCR
normal
operation mode.
(
10
)