Panasonic AG-1980P - Audio Dubbing Procedure

Editing
Audio
Dubbing
This function
is
used to
add
background
music, narration,
etc. on an already recorded
tape.
Preparations
•
Insert
a
recorded cassette
with an erasure prevention
tab.
•
Select the corresponding
input
connectors.
(Refer
to “Preparations”
on
page
28.)
1 2
Operations
1
Press
PLAY
and search
for
the starting
point where you
wish to record the new
sound-track.
2
Press PAUSE/STILL
at the starting point
of
Audio
Dubbing.
3 Press AUDIO DUB.
(AUDIO
DUB Indicator is lit.)
4
Press PAUSE/STILL
to start Audio Dubbing.
5
Stop Audio
Dubbing by pressing
STOP.
Note:
A new
sound is
dubbed onto the normal
audio track
of the
tape, and the
original
sound
is erased. However,
the
original
sound is
maintained
on
the Hi-Fi
audio tracks. This
means
that
Audio
Dubbing
is made
monaurally.
•
Press AUDIO
OUT to select the normal
audio
track
to
listen
to
the
sound recorded with
Audio Dubbing.
•
Select the Hi-Fi
audio tracks
to
listen
to the original sound.
•Set
Hi-Fi/NORMAL
MIX
to “ON” to
listen
to both
the
original sound and
the sound-track
added by Audio
Dubbing.
(
31
)