Panasonic AG-1980P - VCR Controls, Indicators, and Connectors

Controls, Indicators
and Connectors
Basic
Controls
©
POWER
Button with
Indicator
Turns
the
VCR
on
and off.
•
Auto power on
Inserting
a
video cassette
automatically
turns
the VCR
on.
©
Hi-Fi REC
LEVEL Control
Adjusts
the Hi-Fi
recording
level
so
that the
peak
reaches about
+4
dB
on
the Audio Level
Meter.
©
S-VHS Selector
Selects
the correct tape
recording mode.
ON:
S-VHS
cassettes
are recorded in the
S-VHS
System.
•The
S-VHS
indicator is lit.
OFF: S-VHS
cassettes
are recorded
in the VHS
system.
•The
S-VHS
indicator is not
lit.
•VHS
cassettes are recorded
automatically
in the VHS
system
irrespective of the
switch position.
•For
playback,
it
is
not
necessary
to operate this
switch.
•
S-VHS recording cannot be
played back on
a
conventional VHS
VCR.
©
REW Button
Use to rewind the tape rapidly."
<kt
appears
on the
VCR
Display.
When
this
button is
held pressed during
Normal
playback or
Rewind
operation,
the
picture is
played
back at
higher speed
in
reverse direction.
(Review Playback)
If
you
tap
this button during Normal
Playback,
Review
Playback
remains
activated. Press
PLAY to resume
Normal Playback.
©
PLAY Button
Starts normal
playback.
is lit on
the
VCR Display.
©
FF Button
Used
to advance
the tape
rapidly. “t>l>
”
appears on
the
VCR Display.
When this button is
held pressed
during Normal
playback
or Fast
Forward operation,
the picture is
played back
at
higher speed in forward
direction.
(Cue
Playback)
if
you
tap
this button during
Normal
Playback,
Cue
Playback
remains
activated. Press
PLAY to
resume
Normal Playback.