Infrared Remote Controller
Power
source
for
the Remote Controller
The Infrared
Remote
Controller
is powered
by 2 ANSI
“AA”
size
batteries.
Replace the
batteries with new
ones
about every year:
However,
battery life
depends
on the
frequency
of use or the
selected operation
mode.
Precautions for battery
replacement
•Load new
batteries
with their
polarities
(+
and
-) aligned
correctly.
•
Do not mix new
and old batteries and
never
use
an
alkaline battery
with a manganese battery.
•
Do
not
apply heat to the batteries,
or an
internal
short-circuit
may occur.
•
Remove batteries and store them
in a cool and dry place
when
Remote Controller
is
not in
use
for long
periods of
time.
•
Remove spent
batteries immediately and
dispose of
them.
Loading the batteries
1
Remove Battery
Compartment Lid.
2
Insert the
batteries, aligning their polarities
as indicated
inside
Battery
Compartment.
3
Replace
the lid.
(
19
)
To Next Page
Loading...
