Panasonic AG-CX10

SKAARHOJ DEVICE CORES
Open the Firmware Updater Application and use the “Load Firmware from file” in the option tab
Select the “.hex” firmware file. Naming might be different dependent on browser but it should be a .hex file to be selected.
On PC.
Important to select proper COM port. See “Port selection on
Windows” in Installation and Operation manual https://
www.skaarhoj.com/support/manuals/ “
After the firmware have been generated press “Download”
Notice on Windows the Port dropdown will display “COM” ports.
Please see section “Port selection on Windows” in Installation and
Operation manual https://www.skaarhoj.com/support/manuals/
On Mac
When done the Firmware Updater application reports “Firmware successfully updated”
11