49
1 With the AUDIO MON/VAR button, adjust the
volume of the sound that is output from the
internal speaker and PHONES jack.
On the remote control, press the ZOOM/VOL
button.
• This button works differently during variable
speed search and pause.
(Pages 48 and 51)
Connect the camera to a television with an AV
cable or S-video cord (not included) to view the
images on the television.
1 Connect the camera-recorder to the TV set
(Page 55).
2 Start playback.
• To show the information that appears on the
viewfinder and LCD, press the OSD button on
the remote control.
Press the OSD button again to clear the
display.
Press the DATE/TIME button on the remote control
to show the date and time of shooting on the
screen. The display changes as follows each time
you press the button.
Adjusting the volume
Viewing images on a television
AUDIO MON/VAR button
OSD
COUNTER
RESET TITLE
MULTI/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
Checking the date and time
OSD
COUNTER
RESET TITLE
MULTI/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
Time
Date
Time and Date
Original screen
Playback
To Next Page
Loading...
