Panasonic AG-DVX100B - OTHER FUNCTIONS Screen Options (Continued)

78
Setup menu list (continued)
are the factory settings.
OTHER FUNCTIONS screen
Item/
(Display
mode)
Description of settings
POWER SAVE
(camera)
Select the power saving mode.
When you don’t perform any specified
operations for five minutes*
ON: the camera recorder turns off
automatically.
OFF
: the cylinder head pauses and
goes into standby mode without cutting
the power
.
*The camera recorder does not go into
power save mode if you use the follow-
ing controls.
•AUTO Button
• FOCUS switch
• PUSH AUTO button
• GAIN switch. WHITE BAL switch
• WHITE BAL switch
• IRIS button and dial
• CH1/CH2 SELECT switch
• INPUT1/2 switch
• AUDIO control
• OIS button
• SHUTTER button
• SPEED SEL button
• Zoom button and ring
• HANDLE ZOOM switch
• Opening or closing the LCD
HP MODE
(camera)
Select headphone output.
TAPE:
Sound recorded on the tape is
output.
LIVE:
Current input is output.
The beep sound is not output even if
you have selected ON for BEEP
SOUND. Use this when you are
shooting in the 24P mode or any
other time that sound delay becomes
noticeable.
USER FILE
(camera)
(VCR)
LOAD:
The previous scene file settings are
loaded.
SAVE:
The changed user file settings are
saved.
INITIAL:
The user file settings are returned to
the factory settings.
• After LOAD or INITIAL, switch
camera-recorder OFF and then back
ON to ensure that the settings take
effect.
FILE TRANS
(camera)
Make settings for scene file transfer.
(Page 47)
SCENE:
Transfer the scene file currently
selected with the SCENE dial.
SCENE ALL:
Transfer all scene files.
USER:
Transfer all user scene files.
Note
When in FILE TRANS mode, only
the menu operation buttons will
function.
FILE RECEIVE
(VCR)
Makes the camera ready to receive
scene files from another camera.
(Page 47)
Note
RECEIVE MODE appears on the screen after
you set this mode.
When in FILE RECEIVE mode, only
the menu operation buttons will
function.
HOUR METER
(camera)
(VCR)
Displays the total running time (a 5-
digit figure in 1-hour increments) of the
cylinder head.
Item/
(Display
mode)
Description of settings