107
SW&DISP SETUP screen
Item
Display
mode
Q.MENU Description of settings
IRIS DIAL CAMERA
PHOTO
Sets the rotation direction and the aperture control of the IRIS dial. (In
MANUAL IRIS mode)
DOWN OPEN: The iris opens when the IRIS dial is turned
downward.
UP OPEN: The iris opens when the IRIS dial is turned upward.
USER1 SW CAMERA
PHOTO
PB
Selects the function assigned to the USER1 button.
INH: No function assigned.
(PUSH)AF: Switches to auto focus mode when the button is held
during manual focus mode.
BACKLIGHT: Auto iris control for the backlight compensation.
(Page 48)
SPOTLIGHT: Switches auto iris control for the spotlight on or off.
BLACKFADE: Blackfade (Page 47)
WHITEFADE: Whitefade (Page 47)
ATW: Switches the ATW function on or off.
ATW LOCK: Fixes the white balance value when the button is
pressed during ATW. Press again to perform ATW.
HIGH GAIN: The gain mode switches between normal and high
with each press of the button. Gain can be set to up
to 34 dB in high gain mode. (Page 42)
D.ZOOM: Changes the ratio of the DIGITAL ZOOM function.
Each press of the button changes the ratio in the
following order: OFF (x1) → x2 → x5 → x10 → OFF
(x1). (Page 39)
EVF DTL: Emphasizes outlines of images in the LCD monitor
and viewfinder for easier focusing when the button is
pressed.
SHOT MARK: Shot mark recording (Page 48)
LAST CLIP: Deletes the last recorded clip. (Page 50)
WFM: Displays a waveform on the LCD monitor (only
during CAMERA mode).
USER2 SW CAMERA
PHOTO
PB
Assigns a function to the USER2 button.
The setting contents are the same as USER1 SW.
BACKLIGHT
USER3 SW CAMERA
PHOTO
PB
Assigns a function to the USER3 button.
The setting contents are the same as USER1 SW.
SHOT MARK
INDICATOR PB
Selects whether to display the thumbnail indicator.
ON: Displayed
OFF: Not displayed
FOCUS
ASSIST SW
CAMERA
PHOTO
Assigns a function to the FOCUS ASSIST button.
EXPANDED: Displays the center of the screen in expanded view.
BAR: A bar extends to the right as focus is aligned.
BOTH: Enables both expanded view and focus bar display.
RING SW CAMERA
PHOTO
Assigns a function to the RING switch.
ZOOM: Switch between FOCUS and ZOOM.
IRIS: Switch between FOCUS and IRIS.
AUTO SW CAMERA
PHOTO
Sets the face detection function during auto mode to ON or OFF.
A
: Enables face detection.
A
OFF
: Disables face detection.
: Can also be configured in Quick Menu. (Page 97) indicates the factory setting.
To Next Page
Loading...
