77
Useful playback functions
Adjust volume (remote control)
1
Adjust the audio output of the built-in
speaker and headphones during playback.
Press the ZOOM/VOL buttons.
You can view the images on a television if
you connect the unit to a TV set using an AV
cable (included), HDMI cable (not included) or
component video cable (included).
1
Connect the camera-recorder to the TV set.
(Page 85)
2
Start playback.
To show the information that appears on the
viewfinder and LCD on a television, press
the EXT. DISPLAY button on the remote
control.
Press the EXT. DISPLAY button again to
clear the display.
•
Checking the date and time
Press the DATE/TIME button on the remote
control to show the date and time of shooting on
the viewfinder and the LCD monitor. The display
changes as follows each time you press the button.
Time
Date
Time and Date
No display
To Next Page
Loading...
