82
Printing photos on a printer (PictBridge) (continued)
To prevent printing errors, do not do the
following while printing is in progress.
Disconnect the USB connection cable
Open the card cover and remove the SD
Memory Card
Change modes
Turn the power off
When you print photos recorded with this
camera in 16:9 aspect ratio, the edges may
be cut off.
If the printer supports functions such as
trimming and printing without frames, try
clearing these settings before printing. (Refer
to the operating instructions for the printer.)
When the camera is connected to a printer,
DPOF printing is disabled.
•
ā
ā
ā
ā
•
•
To Next Page
Loading...
