22
Using scene files (continued)
Initializing scene files
You can return current setting values to their
factory default settings.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
The CAMERA lamp lights red.
2
Press the MENU button.
3
Select SCENE1 or SCENE2 for the FILE
SELECT item in the setting menu SCENE
FILE screen, and then press the ENTER
button.
4
Select INIT for the LOAD/SAVE/INIT item in
the setting menu SCENE FILE screen, and
then press the ENTER button.
5
Select YES and press the ENTER button
when the confirmation message appears.
The scene file selected in the FILE SELECT
item will be initialized.
“SCENE 1 (or SCENE2) LOADED TURN
POWER OFF” appears on the screen. The
default settings will be applied when you
restart the camera.
•
•
•
To Next Page
Loading...
