89
TV/Monitor
Only the output signals from the camera are shown.
Audio cable (optional)
Video cable (optional)
Connect these cables to the
terminals on the television.
TV/Monitor
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
Since the component terminal only outputs pictures, an audio cable must be connected at the same time.
(Connect the cable to the audio input terminal of the component terminal input. For details, refer to the
operation manual for the TV.)
The component terminal of the unit is the BNC type. To connect a pin-type cable, use a pin-BNC
converter plug (optional).
•
•
Output by COMPONENT OUT, and VIDEO OUT
Simultaneous output from COMPONENT OUT and VIDEO OUT is not possible. Output is determined by
the terminal selected by the OUTPUT switch.
■
■
•
To Next Page
Loading...
